French
Contact information:
Simple Solutions & Innovations, Inc.
701 Loyal Street
Danville, VA 24541
Office: (434) 792-7392
Fax: (434)-792-7395
Shipping & Handling
SSI offers shipping through all UPS and Fedex shipping methods. If you wish to use your own account number or a courier of your choice, please let us know and we can arrange pick up. To keep shipping and handling costs to a minimum, we will not add insurance coverage to any shipment unless the customer specifically requests SSI insure the shipment. If the courier loses the shipment after it has left our facility, SSI will not be held responsible for replacing any lost product/s.
Printhead Return Policy and Procedure
- Initiate process by notifying SSI that you have a printhead that needs to be replaced by emailing: websales@ssiprintheads.com with your printhead and printer model information, etc. You may also call us at the office number above.
- SSI personnel will respond to you with an RMA number.
- Send the product(s) to:
RMA #
Simple Solutions & Innovations, Inc.
701 Loyal Street
Danville, VA 24541 - When you send the product(s): It is always helpful to send correspondence/note with it indicating what you think the problem is or a description of the problem.
- Our Technicians will inspect/evaluate for warranty claims and provide analysis promptly.
SSI Printhead Product Warranty Information & Return Procedure
For SSI Aftermarket Printheads:The Warranty Period for SSI Printhead branded printheads purchased from SSI is one year from the date of purchase, or one million inches.
Our warranty covers any manufacturer defects or workmanship under normal use during the warranty period. To correct any unforeseen issue, SSI will issue an RMA and provide an evaluation of the printhead, as described above.
For OEM Products: OEM Products will carry the OEM product warranty and are subject to the decision made by the OEM.
Returns: all returns must be within 30 days of date of purchase and be un-used and un-opened to receive a credit/refund. Please make all returns to the address listed at the top of the page along with your original purchase agreement or order number.
Proper care and handling of your SSI Printhead
Start-up energizing of printhead for initial operation
THE RESISTOR ELEMENTS CAN BE DAMAGED BY OVERPOWERING OR OVERHEATING. It is therefore advisable to determine that the print head driver circuitry is functioning properly before applying full power to the printhead. After this has been established overstressing the unit can be avoided by limiting the applied pulse voltage at or below the maximum allowed, or by simply setting the pulse voltage low initially and then increasing it slowly to obtain normal printing performance.
Cleaning Method
Isopropyl Alcohol may be used to periodically remove paper residue from the printhead. Apply with cotton swab or soft cloth, using due care. Frequency of cleaning depends upon paper type and mechanical factors, and should be evaluated in a prototype system under normal operating conditions. Do not use abrasive materials in cleaning. Only clean when printhead has been de-energized and cooled to room ambient to avoid thermal shock damage.
Information Security
Your information is important to us. This website complies with PCI/DSS compliance via our payment processor, Cayan.
- All connections are required to be HTTPS
- No payment information is saved on our servers
- All customer information is stored behind password-protected secure gateway.